JN-AN-1907... Makefiles配置

1. TARGET = JN-AN-1907-Zigbee-Valve-Controller-JN5169
   
2. DEV_TYPE = ValveController
   
3. 
   
4. #  Note: Target name must be the same as the subfolder name
   
5. ##############################################################################
   
6. #User definable make parameters that may be overwritten from the command line
   
7. 
   
8. # Default target device is the JN5148
   
9. 
   
10. JENNIC_CHIP ?= JN5169
    
11. 
    
12. ##############################################################################
    
13. # Default DK2 development kit target hardware
    
14. 
    
15. JENNIC_PCB ?= DEVKIT4
    
16. 
    
17. ##############################################################################
    
18. # Select the network stack (e.g. MAC, ZBPRO)
    
19. 
    
20. JENNIC_STACK ?= MAC
    
21. 
    
22. ##############################################################################
    
23. # Debug options define DEBUG for HW debug
    
24. #DEBUG ?=HW
    
25. #
    
26. #
    
27. # Define which UART to use for debug
    
28. DEBUG_PORT ?= UART1
    
29. 
    
30. ##############################################################################
    
31. # Define TRACE to use with DBG module
    
32. TRACE ?= 1
    
33. 
    
34. ##############################################################################
    
35. # Define configuration
    
36. ifeq ($(FLOW_CONTROL), NO_FLOW_CONTROL)
    
37.         CFLAGS  += -DENABLE_NO_FLOW_CONTROL
    
38.         BIN_SUFFIX = _NO_FLOW_CTRL
    
39. endif
    
40. 
    
41. ifeq ($(FLOW_CONTROL), HW_FLOW_CONTROL)
    
42.         CFLAGS  += -DENABLE_HW_FLOW_CONTROL
    
43.         BIN_SUFFIX = _HW_FLOW_CTRL
    
44. endif
    
45. 
    
46. ifeq ($(FLOW_CONTROL), HW_SW_FLOW_CONTROL)
    
47.         CFLAGS  += -DENABLE_HW_SW_FLOW_CONTROL
    
48.         BIN_SUFFIX = _HW_SW_FLOW_CTRL
    
49. endif
    
50. 
    
51. ##############################################################################
    
52. 
    
53. ##############################################################################
    
54. 
    
55. ##############################################################################
    
56. # Path definitions
    
57. # Select definitions for either single or multiple targets
    
58. 
    
59. # Use if application directory contains multiple targets
    
60. 
    
61. SDK_BASE_DIR                    = $(abspath ../../../sdk/JN-SW-4163)
    
62. LZSTACK_BASE_DIR           = $(abspath ../../..)
    
63. APP_BASE            = $(abspath ../..)
    
64. APP_BLD_DIR         = $(APP_BASE)/$(DEV_TYPE)/Build
    
65. APP_SRC_DIR         = $(APP_BASE)/$(DEV_TYPE)/Source
    
66. 
    
67. APP_COMMON_SRC_DIR         = $(APP_BASE)/Common/Source
    
68. 
    
69. JENOS_DIR                        = $(LZSTACK_BASE_DIR)/LZStackV5/JenOS
    
70. STACK_DIR                        = $(LZSTACK_BASE_DIR)/LZStackV5/stack
    
71. STACK_MAC_DIR                = $(LZSTACK_BASE_DIR)/LZStackV5/stack/mac
    
72. STACK_NWK_DIR                = $(LZSTACK_BASE_DIR)/LZStackV5/stack/nwk
    
73. STACK_ZDO_DIR                = $(LZSTACK_BASE_DIR)/LZStackV5/stack/zdo
    
74. STACK_APS_DIR                = $(LZSTACK_BASE_DIR)/LZStackV5/stack/aps
    
75. STACK_COMMON_DIR        = $(LZSTACK_BASE_DIR)/LZStackV5/common

复制代码