谷动谷力

标题: 【openwrt 】openwrt 执行命令lsusb出错 -ash: lsusb: not found解决 [打印本页]

作者: sunsili 时间: 2023-6-7 14:04
标题: 【openwrt 】openwrt 执行命令lsusb出错 -ash: lsusb: not found解决
本帖最后由 sunsili 于 2023-7-25 08:39 编辑

【openwrt 】openwrt 执行命令lsusb出错 -ash: lsusb: not found解决

lsusb是开发usb设备的调试工具

【现象】
查看当前接入的usb设备执行命令：
lsusb
-ash: lsusb: not found

运行出错

【原因】
lsusb末安装

【解决方法】
方法一：
手动安装usbublits,
安装usbutils包，OPKG会自动给你选择所依赖的其他包关系:
opkg update

opkg install usbutils
Installing usbutils (013-2) to root...
Downloading https://downloads.openwrt.org/re ... 3-2_mipsel_24kc.ipk
Installing librt (1.1.24-3) to root...
Downloading https://downloads.openwrt.org/re ... 4-3_mipsel_24kc.ipk
Installing libusb-1.0-0 (1.0.24-4) to root...
Downloading https://downloads.openwrt.org/re ... 4-4_mipsel_24kc.ipk
Installing libevdev (1.13.0-1) to root...
Downloading https://downloads.openwrt.org/re ... 0-1_mipsel_24kc.ipk
Installing libudev-zero (1.0.1-1) to root...
Downloading https://downloads.openwrt.org/re ... 1-1_mipsel_24kc.ipk
Installing usbids (0.359-1) to root...
Downloading https://downloads.openwrt.org/re ... 9-1_mipsel_24kc.ipk
Configuring libevdev.
Configuring librt.
Configuring libusb-1.0-0.
Configuring libudev-zero.
Configuring usbids.
Configuring usbutils.
安装成功。（只要联网都安装成功，并能关联安装相关依赖）

方法二：
编译openwrt内核时，勾选usbutils包，[M]编译成ipk包与上面安装一样的效果，编译成内核组件，刷写固件，就有的。

查看当前接入的usb设备
lsusb
Bus 001 Device 002: ID 1782:4e00 UNISOC UNISOC-8910
Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.143 ehci_hcd EHCI Host Controller

可以看列出相关usb设备

欢迎光临谷动谷力 (http://bbs.sunsili.com/)