【openwrt 】openwrt 执行命令lsusb出错 -ash: lsusb: not found解决 lsusb是开发usb设备的调试工具 【现象】 查看当前接入的usb设备执行命令： lsusb -ash: lsusb: not found 运行出错 【原因】 lsusb末安装 【解决方法】 方法一： 手动安装usbublits, 安装usbutils包，OPKG会自动给你选择所依赖的其他包关系: opkg update opkg install usbutils Installing usbutils (013-2) to root... Downloading https://downloads.openwrt.org/re ... 3-2_mipsel_24kc.ipk Installing librt (1.1.24-3) to root... Downloading https://downloads.openwrt.org/re ... 4-3_mipsel_24kc.ipk Installing libusb-1.0-0 (1.0.24-4) to root... Downloading https://downloads.openwrt.org/re ... 4-4_mipsel_24kc.ipk Installing libevdev (1.13.0-1) to root... Downloading https://downloads.openwrt.org/re ... 0-1_mipsel_24kc.ipk Installing libudev-zero (1.0.1-1) to root... Downloading https://downloads.openwrt.org/re ... 1-1_mipsel_24kc.ipk Installing usbids (0.359-1) to root... Downloading https://downloads.openwrt.org/re ... 9-1_mipsel_24kc.ipk Configuring libevdev. Configuring librt. Configuring libusb-1.0-0. Configuring libudev-zero. Configuring usbids. Configuring usbutils. 安装成功。（只要联网都安装成功，并能关联安装相关依赖） 方法二： 编译openwrt内核时，勾选usbutils包，[M]编译成ipk包与上面安装 一样的效果， 查看当前接入的usb设备 lsusb Bus 001 Device 002: ID 1782:4e00 UNISOC UNISOC-8910 Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.143 ehci_hcd EHCI Host Controller 可以看列出相关usb设备 |
|Archiver|手机版|深圳市光明谷科技有限公司|光明谷商城|Sunshine Silicon Corpporation
( 粤ICP备14060730号 ) 
|Sitemap
GMT+8, 2024-4-12 15:57 , Processed in 0.067561 second(s), 35 queries .
Powered by Discuz! X3.2 Licensed
© 2001-2013 Comsenz Inc.
